| Author |
 Topic  |
|
|
Emil
tech support manager
Israel
978 Posts |
 Posted - 22 Jul 2010 : 03:43:50
|
Dear Frends,
 There is a New OS veriosn 3.1.19 for enhanced Vision models.
In this version:
Using the Start and Stop Saving Trend to SD now appends data to a single .utr file. In addition, new SBs 117-118 enable you to display .utr segments on the HMI Display.
Note that previous to this version, using the Start and Stop Saving Trend to SD functions recorded a single, unsegmented .utr file. If the function Stop Recording Trend was used to pause the recording, when Start Saving was again activated, the function automatically overwrote the .utr file of the same name.
To revert to the previous functionality, and overwrite the .utr file, set SB 116, SD Trends to SD: Set to Overwrite .utr.
The new version can be obtained via VisiLogic > Helpp menu > Check for updates > Operating system.
Via VisiLogic > Help menu > Check for updates > Examples you can obtain demo, which shows the new fuctionality.
The complete Vision OS changes list is located at:
http://unitronics.com/data/uploads/VisiLogic_Software_New/Vision_OS_changes.htm
Imprtant note: GPRS with long time ago discontinued GSM modems Sony-Ericson and Wavecom is not supported from this new OS version.
|
|
|
Blitz
Starting Member
11 Posts |
Posted - 22 Jul 2010 : 06:03:56
|
Hi Emil,
This is a cool addition to the trending function. I will try it out.
By the way, the OS link does not work. |
 |
|
|
Emil
tech support manager
Israel
978 Posts |
Posted - 22 Jul 2010 : 06:40:23
|
Hi,
Which link doesn't work - in VisiLogic to the new OS or the link to version changes, stated in the post above/ |
|
|
|
jsu
Starting Member
Sweden
6 Posts |
Posted - 22 Jul 2010 : 08:02:56
|
Hi Emil !
It's the link in your post that doesn't work |
If You have a problem, but you can't solve it with a PLC, You are in trouble. |
|
|
|
Blitz
Starting Member
11 Posts |
Posted - 22 Jul 2010 : 08:15:37
|
I was referring to the link on the Vision OS changes list.
I have successfully updated my OS veriosn to 3.1.19 using VisiLogic > Help menu ...
What is the name of the new trend Example project you are referring to? I also tried to update the Example project but the process completed quickly and I did not noticed any prompt/message about which Example project was updated.
|
|
|
|
Emil
tech support manager
Israel
978 Posts |
Posted - 22 Jul 2010 : 08:28:15
|
It's V570_SD_Card_Trend_Read_Write_Append.vlp. After download, you neeed to find it in VisiLogic > Help menu > Examples > Project examples > SC folder.
If you cannot take it, please send e-mail to support@unitronics.com. I'll reply with the demo attached and will take care to make the example downloadable via VisiLogic. |
|
|
| |
Topic |
|
OS V3.1.19 - Trend to SD appen
Forum Locked
